Got a grimy driveway or mouldy walls but not sure about pressure washing costs? You’re definitely not alone in this.
Most residential pressure washing jobs in Australia cost between AUD$150 and AUD$500. Companies usually calculate these costs per square meter. Simple cleaning jobs range from AUD$3 to AUD$5 per square meter. Some services might even charge as little as AUD$1.50 per square meter.
Your pressure cleaning budget will vary by a lot based on the area size and job complexity. A small to medium driveway cleanup costs AUD$190 to AUD$350. Larger driveways might set you back AUD$300 to AUD$700. Patio cleaning averages around AUD$200. Roof cleaning prices typically fall between AUD$150 and AUD$350.
The cost to clean a three-bedroom apartment’s exterior hovers around AUD$340. Full house exteriors could reach up to AUD$450. Companies also factor travel time, setup, and equipment costs into their final price.
This piece breaks down pressure washing costs in South East Queensland, from the Sunshine Coast to Brisbane. These details will help you make a smart choice before you book your next cleaning service.
Driveway Pressure Washing
A clean driveway makes your property look amazing. Professional pressure washing not only gives your driveway a spotless look but also stops damage from dirt, oil, and plant growth.
Driveway pressure washing cost
Your driveway pressure washing costs in South East Queensland depend on several things. Most services charge between AUD$275 and AUD$240. Many professionals base their rates on square footage, charging between AUD$0.46 and AUD$0.84 per square foot.
The size of your driveway plays a big role in the final price:
- Small driveways (200 sq ft): AUD$91.74–AUD$168.19
- Medium driveways (400 sq ft): AUD$183.48–AUD$336.38
- Large driveways (800 sq ft): AUD$366.96–AUD$672.76
Your driveway’s material changes the cost too. Concrete driveways usually cost between AUD$183.48 and AUD$290.51 for a 600 sq ft area. Asphalt driveways cost from AUD$191.12 to AUD$298.15 for the same size. Brick, paver, and gravel driveways cost more because they have textured surfaces that need extra cleaning.
Fremantle Roofing Services in the Brisbane to Sunshine Coast region charges these hourly rates:
- 1 hour (covers 1-40 square meters): AUD$252.28
- 1-2 hours (covers 30-80 square meters): AUD$252.28-AUD$420.47
Ready to restore your driveway’s appearance? Contact Water Attack Pressure Washing today to get professional driveway cleaning services at competitive prices.
SEQLD homeowners typically spend between AUD$152.90 and AUD$535.15 for driveway pressure washing. The average cost sits at AUD$321.09. Square meter rates range from AUD$4.59 to AUD$7.64.
Driveway pressure washing techniques
The right technique helps you clean your driveway without causing damage. Good preparation makes a big difference in your results. Here’s what you should do before pressure washing:
- Clear all obstacles, vehicles, and garden tools from the driveway
- Clean the surface to remove loose debris
- Protect nearby plants and items from water pressure
- Use special cleaners for tough stains (degreasers for oil, specific solutions for rust)
Keep the right distance between the nozzle and surface to prevent damage. Holding the nozzle too close can damage delicate materials through etching, chipping, or gouging. Professionals suggest using a pressure washer with 2000 to 3000 PSI for concrete driveways.
Here’s the best way to pressure wash:
- Start at the top of your driveway and work down with the water flow
- Use steady, overlapping sweeps that cover each area by several inches
- Apply detergent with a black nozzle and let it sit for about 15 minutes
- Switch to a high-pressure nozzle and rinse using the same pattern
This method gives you a clean driveway without streaks or damage. Let the driveway dry completely before adding concrete sealant to protect it from future stains.
Driveway pressure washing challenges
Pressure washing looks simple but comes with its share of problems. These can lead to poor results or expensive damage. Using wrong pressure settings ranks among the biggest mistakes. Too much pressure can harm your driveway, especially if it’s made of delicate materials like certain concrete types or pavers.
Different surfaces need different approaches:
- Concrete driveways: Their porous nature needs special cleaning solutions and the right pressure to remove deep dirt
- Asphalt driveways: These need lower pressure and pre-treatment with cleaners
- Brick driveways: Bricks handle high pressure well, but dirt collects in the mortar joints
- Paver driveways: These take more work because of their patterns and many gaps where dirt builds up
Safety should be your top priority. Wear goggles and gloves because high-pressure water can throw back debris and chemicals that might hurt your eyes and skin. Pressure washers can cause injuries if you don’t use them right.
Weather affects your results too. Pick a cloudy day or work early morning or late evening. This stops cleaning solutions from drying too fast. Make sure water drains away from your house to avoid structural problems.
Your driveway needs proper care after pressure washing. Without regular cleaning and sealing, it will get dirty again quickly. Rinse the surface well to remove leftover detergent or debris that might cause discolouration.
Professional services might work better than DIY. Experts know the exact pressure needed for different surfaces and can adjust their equipment. They also use industrial-grade products that work much better than regular cleaning methods.
Roof Pressure Washing
A clean roof does more than look good—it helps protect your home’s structure and prevents damage that can get pricey. Pressure washing your roof gets rid of moss, algae, and debris that break down roofing materials as time passes.
Roof pressure washing cost
Australian roof cleaning prices change quite a bit based on size, condition, and cleaning method. Professional roof pressure washing costs between AUD$0.31 and AUD$1.07 per square foot. A typical 1,500-square-foot roof will set you back around AUD$458.70 to AUD$1,605.44.
Roof pressure cleaning services in South East Queensland, from Brisbane to the Sunshine Coast, usually cost between AUD$688.05 and AUD$950. These prices include specialised equipment, detergents, and trained technicians who know what they’re doing.
Smaller roofs between 100 and 150 square meters cost about AUD$611.60. Bigger roofs naturally cost more, with high-pressure cleaning ranging from AUD$611.60 to AUD$1,498.41.
Labor makes up about 90% of what you’ll pay. Professional cleaners charge between AUD$53.51 and AUD$122.32 per hour. These rates reflect their expertise and the safety measures needed to clean effectively.
Roof pressure washing safety considerations
Roof cleaning comes with serious safety risks you shouldn’t take lightly. Note that wet surfaces with moss and mould become as slippery as oil. Sloped roofs make this danger even worse.
Don’t risk your safety with DIY roof cleaning. Trust the experts at Water Attack Pressure Washing to clean your roof safely and effectively.
Professional roof cleaners follow strict safety rules:
- They wear proper safety gear: non-slip shoes with good traction, helmets, and protective gloves
- They use safety harnesses anchored to stable points on the roof or house
- They check weather conditions and avoid wet or windy days
- They set up sturdy ladders with proper support
Roof cleaning has many dangers beyond slippery surfaces. Power lines near your roof create serious risks, so cleaners must work carefully and sometimes avoid metal tools nearby. Weak spots in roofing material might give way under weight and cause falls or injuries.
Falls are the biggest safety concern in roof cleaning. Safety experts say falls cause the most deaths in construction and pose a huge risk in roof maintenance. That’s why proper fall protection gear and training are must-haves for professional cleaning services.
The right cleaning method for different roofing materials matters too. High-pressure washing can harm certain materials like asphalt shingles, slate, and tile—and might void warranties on new roofs. Metal roofs handle pressure washing better, but still need careful treatment.
Roof pressure washing best practices
Professional cleaners use proven methods to clean effectively without causing damage. The quickest way starts with picking the right cleaning method—soft washing works better than high-pressure washing for most homes.
When pressure washing makes sense, cleaners start by applying biodegradable detergent to break down algae, moss, and dirt. They let this solution sit for a while, especially on tough spots, before rinsing.
Professional cleaners stick to these key rules when using pressure washers:
They spray downward only, never up, so water doesn’t get stuck under shingles and cause mould. They start with low pressure and adjust slowly until they find what works best without damaging the roof.
They check their work as they go. Good cleaners squat down to look at shingles up close and make sure the pressure isn’t too strong. This careful approach means cleaning just a few shingles at a time while watching for damage.
Your roof needs cleaning only once every year or two. Cleaning too often can wear out your roof faster and shorten its life.
The difference between pressure washing and soft washing needs careful thought. Pressure washing uses 1,300-2,800 PSI water pressure to remove tough dirt. This high pressure might damage delicate roofing materials like shingles or tiles. Soft washing uses lower pressure with special cleaning solutions and offers a safer option for most homes.
Ask about cleaning methods and experience with your roof type when choosing a professional service. Knowing the right technique for your roof ensures good cleaning without risking damage or voiding warranties.
Patio Pressure Washing
Your patio deserves the same care as the rest of your home. Patios get dirty over time from regular use and weather exposure. Dirt, grime, mould, and stains can make them look uninviting. Professional pressure washing can bring these spaces back to life and make them welcoming again.
Patio pressure washing cost
Patio pressure washing costs in South East Queensland depend on size, material, and condition. The average cost runs about AUD$229.35. Small to medium-sized patios usually cost between AUD$290.51 and AUD$535.15.
Professionals use these common pricing structures:
- Per square meter: Professional services charge between AUD$0.15 and AUD$0.76 per square foot. This equals about AUD$1.61 to AUD$8.18 per square meter.
- Flat rate by size: Companies set these prices based on patio size:
- 49 sq ft (7×7): Up to AUD$122.32
- 144 sq ft (12×12): Up to AUD$244.64
- 288 sq ft (16×18): Up to AUD$305.80
- 400 sq ft (20×20): Up to AUD$382.25
- Job-based pricing: Some companies price by project size:
- 50 square meters: About AUD$305.80
- 60-80 square meters: About AUD$611.60
- Up to 150 square meters: AUD$993.84
Professional pressure washing services charge between AUD$122.32 and AUD$214.06 per hour. Most patios take one to two hours to clean based on their size and condition.
Give your outdoor space new life with professional patio cleaning. Contact Water Attack Pressure Washing to get a free quote for your patio.
Patio pressure washing methods
Your patio’s material and condition determine the best pressure washing method. Professionals use specific techniques to clean effectively without damaging the surface.
Standard pressure washing removes dirt, grime, and stains with high-pressure water streams. This works best on tough surfaces like concrete and certain stones. Professionals adjust the pressure between 1,600 and 2,800 PSI based on the surface.
Soft washing works great for delicate surfaces. This method uses special cleaning solutions with lower pressure. Wooden patios and some natural stones need this gentler approach. The cleaning solutions break down dirt while gentle water pressure washes it away safely.
Steam cleaning combines high heat with lower pressure for effective cleaning. As noted by experts, “We use high heat (steam) and lower pressure equipment to clean our pavers”. Heat helps remove tough stains and grease better than pressure alone.
Professionals follow these steps to get the best results:
- Remove furniture and debris from the patio
- Treat tough stains with specific cleaners
- Clean systematically with the chosen method
- Remove all cleaning solutions with a thorough rinse
- Let the surface dry before putting furniture back
Special attachments help clean more efficiently. “Use a patio cleaning accessory head to make this process even smoother. The rotary jet nozzles work in a circular fashion to spray a more constant, balanced stream of water”.
Patio pressure washing surface types
Each patio surface needs its own pressure washing approach to avoid damage while getting the best clean.
Concrete patios handle pressure washing well. They can take pressures between 2,500 and 3,000 PSI. Professionals usually use a 25-degree nozzle for general cleaning. Concrete patio cleaning costs range from AUD$198.77 to AUD$336.38.
Brick and paver patios need careful cleaning despite their strength. Too much pressure can wear down the mortar between bricks. Professional cleaning costs between AUD$321.09 and AUD$382.25. “Pressure washing concrete pavers, especially newer ones, can easily damage the surface finish”. Expert cleaners use fan tips instead of jet tips to protect the surface.
Natural stone patios need gentle cleaning because they absorb water easily. These materials can stain or damage if not cleaned properly. Professionals use lower pressure settings and cleaners made specifically for natural stone.
Wooden decking needs the gentlest approach. “For wooden decking you can use anything up to 130 bars”. Higher pressure can damage paint or splinter the wood permanently.
Block-paved patios come with special challenges. “We don’t recommend using [pressure washing] to clean a block-paved patio, as it will simply wash away all the sand and dirt which binds the bricks together”. Professionals use very low pressure and special methods to keep the binding materials in place.
Many professionals suggest sealing your patio after cleaning. “Applying a sealant can protect the surface from stains, weather damage, and wear”. This extra service costs between AUD$275.22 and AUD$565.73 based on size and material.
Regular patio maintenance through professional pressure washing keeps outdoor spaces beautiful and functional year-round across South East Queensland, from Brisbane to the Sunshine Coast.
Exterior Wall Pressure Washing
Your home’s exterior walls get dirty over time. Dirt, mould, and environmental pollutants build up and can lower your property’s appearance and value. A professional pressure washing service will restore your home’s look and protect its structure.
Exterior wall pressure washing cost
Exterior wall pressure washing in South East Queensland costs between AUD$229.35 to AUD$1,146.74 for single-storey homes. Larger or multi-storey properties cost more. Two-storey houses range between AUD$611.60 and AUD$2,140.59.
Pressure washing services from Brisbane to Sunshine Coast charge by square meter or square foot. You’ll pay between AUD$0.15 and AUD$0.76 per square foot, based on your wall materials and their condition. Standard-sized homes usually fall within these ranges:
Home Size (Square Feet) | Average Cost |
1,500 | AUD$229.35–AUD$1,146.74 |
2,000 | AUD$305.80–AUD$1,528.99 |
2,500 | AUD$382.25–AUD$1,911.24 |
Many companies give package deals that include multiple exterior surfaces. A full exterior pressure washing package costs between AUD$382.25 and AUD$764.50 on average. Prices can go up to AUD$1,528.99 for homes with special materials or complex architecture.
DIY equipment rental costs between AUD$61.16 and AUD$152.90 per day. You’ll also need to buy cleaning solutions and protective gear.
Exterior wall pressure washing for different materials
Each exterior wall material needs specific pressure washing techniques to clean effectively without damage.
Brick walls can handle pressure washing well, but you must watch the mortar joints. Brick surface cleaning costs AUD$0.15 to AUD$0.61 per square foot. Brick withstands moderate pressure, but too much force can harm mortar and cause discolouration.
Stucco walls need gentle treatment because of their texture. Stucco pressure washing costs AUD$0.46 to AUD$0.76 per square foot. Soft washing works best for stucco surfaces to remove dirt and organic growth safely.
Wooden exteriors are delicate to clean. Professional services charge AUD$0.46 to AUD$0.84 per square foot. Low pressure is essential to prevent splintering, etching, or paint stripping.
Vinyl siding is tough but needs proper technique. Costs range from AUD$0.31 to AUD$0.76 per square foot. While vinyl handles moderate pressure well, wrong techniques can push water behind panels and cause moisture damage.
Older homes that might have lead paint need low-pressure washing to avoid environmental contamination.
Exterior wall pressure washing precautions
Safe and effective pressure washing requires attention to several key factors.
Wrong pressure settings can cause serious problems. Too much pressure damages surfaces, strips paint, and forces water behind siding that leads to interior damage. Each surface type needs specific pressure levels:
- Concrete and brick: Can withstand up to 2,800 PSI
- Vinyl siding: Requires moderate pressure (1,300-2,000 PSI)
- Wood and stucco: Needs gentle pressure (under 1,300 PSI)
Professional services give you great advantages. Protect your home’s exterior and improve its curb appeal. Ask Water Attack Pressure Washing about specialised exterior wall cleaning services.
Windows, doors, and electrical fixtures need extra care. Cover light switches and outlets, and close all windows and doors tightly before starting. You must wear proper protective gear—goggles, gloves, and full-length clothing—when using pressure washing equipment.
Mild weather works best for exterior wall cleaning. Experts say, “The best time to clean your facade is on a spring or autumn day, when it is sunny but not too hot, as this speeds up the drying process”.
Most professionals use this step-by-step approach:
- Pre-treat by moistening the wall and removing coarse dirt
- Apply appropriate cleaning solution and allow it to soak
- Use gentle scrubbing for stubborn areas if necessary
- Rinse thoroughly from top to bottom to prevent streaking
DIY pressure washing might seem cheaper, but lack of experience can damage your property. The repair costs are nowhere near professional service fees. Professional pressure washing services across South East Queensland clean your home’s exterior safely and effectively.
Deck and Fence Pressure Washing
Your wooden decks and fences represent a most important investment in your property. Professional pressure washing improves their appearance and adds years to their lifespan by removing harmful elements that speed up deterioration.
Deck and fence pressure washing cost
Size, material, and condition affect the cost of pressure washing wooden structures. Deck cleaning prices range from AUD$229.35 to AUD$611.60. You’ll pay between AUD$229.35 and AUD$458.70 to clean your fence.
Fence cleaning costs between AUD$0.46 and AUD$0.76 per square foot. Here’s what you can expect to pay based on linear footage:
Fence Size (Linear Feet) | Average Cost |
50 | AUD$45.87–AUD$305.80 |
100 | AUD$91.74–AUD$611.60 |
200 | AUD$183.48–AUD$1223.19 |
Professional cleaning of a standard 500-square-foot deck costs between AUD$229.35 to AUD$305.80. Many companies charge AUD$0.54 per square foot on average.
Professional pressure washing extends your wooden surfaces’ life. Contact Water Attack Pressure Washing to clean your deck and fence.
Deck and fence pressure washing techniques
The right technique protects wooden surfaces from damage. Deck and fence pressure washing needs lower pressure settings than concrete cleaning:
- Pressure treated wood: 1,000-1,200 PSI
- Soft woods like cedar: 500-600 PSI
- Composite materials: 1,500 PSI maximum
- Aluminum fencing: 1,800 PSI maximum
Keep the pressure washing wand at least 8 inches from wooden deck surfaces. Use “long sweeping motions with a quick flicking at the end” to avoid creating start and stop marks.
Start cleaning fences by applying detergent from bottom to top to prevent streaking. Let the detergent sit for 5-10 minutes, then rinse from top to bottom.
Your deck needs special attention. Follow the wood’s grain to minimize surface damage. You should never hold the pressure washer in one spot because it can gouge the wood.
Deck and fence pressure washing maintenance tips
Wooden structures need pressure washing every year. A few key maintenance practices protect your investment effectively.
Let the wood dry for several days after pressure washing before you apply stain or sealant. This prevents moisture from getting trapped under new coatings.
A protective sealant costs around AUD$611.60 for a 500-square-foot fence. Staining your fence after cleaning runs between AUD$6.12 and AUD$13.76 per linear foot.
Clean spots with mild soap and water between professional cleanings. These simple maintenance steps keep your deck and fence looking fresh and add years to their life.
Comparison Table
Service Type | Basic Cost Range (AUD$) | Average Cost per Square Meter/Foot | Recommended Pressure Settings | Special Considerations | Recommended Cleaning Frequency |
Driveway | $152.90-$535.15 | $4.59-$7.64 per m² | 2,000-3,000 PSI | Oil and rust stains need pre-treatment; Work in downward direction with water flow | Not specifically mentioned |
Roof | $688.05-$950 | $0.31-$1.07 per sq ft | Not specifically mentioned | Soft washing works better than high-pressure; Weather conditions are significant; Safety equipment needed | Once every 1-2 years |
Patio | $290.51-$535.15 | $1.61-$8.18 per m² | 1,600-2,800 PSI | Surface material determines cleaning technique; Steam cleaning available as option | Not specifically mentioned |
Exterior Wall | $229.35-$1,146.74 (single-storey) | $0.15-$0.76 per sq ft | 1,300-2,800 PSI (varies by material) | Each material needs specific approach; Weather impacts results; Cover electrical fixtures | Not specifically mentioned |
Deck and Fence | $229.35-$611.60 | $0.46-$0.76 per sq ft | 500-1,500 PSI (varies by wood type) | Clean along wood grain; Let dry completely before sealing | Annually |
Conclusion
This detailed guide has covered the costs, techniques, and things to think over for pressure washing surfaces in South East Queensland. Pressure washing proves to be a smart investment that goes beyond looks. Clean surfaces protect your property’s structure and help expensive materials last longer.
Each surface needs its own approach. Your concrete driveway can handle pressures up to 3,000 PSI. Wooden decks need a softer touch at 500-1,500 PSI. This difference shows why professional services often work better than DIY attempts, even though renting equipment might save money.
Safety plays a vital role in deciding whether to do pressure washing yourself. Roof cleaning comes with real dangers. Slippery surfaces, fall risks, and possible material damage are common issues. Professional cleaners bring specialised equipment and years of experience to handle these challenges safely.
Most homeowners worry about cost. You should budget between AUD$150 and AUD$500 for simple residential cleaning jobs. Prices change based on surface type, size, and job complexity. DIY might look cheaper at first, but damage from wrong techniques could cost much more later.
Water Attack Pressure Washing professionals can handle all your pressure washing needs. Get in touch today for a free estimate and see what quality service means.
Regular professional cleaning saves money by stopping expensive repairs. Yearly deck cleaning, roof washing every two years, and regular driveway care prevent early wear of these valuable assets. Quality pressure washing services protect your property’s value and boost its street appeal.
Dirty driveways, mouldy roofs, or aged patios all need attention. Professional pressure washing changes how your property looks and protects your investment. The right pressure, technique, and cleaning solutions will give great results without damaging your valuable surfaces.